Redeem vouchers with the staff scanner

Use any phone as a voucher scanner: sign in, choose your merchant, scan or type a code, redeem it, or give an unused code to a customer at the counter.

For: Staff and admins

Before you start

The scanner runs in the phone's browser at /scan/. There is nothing to install. You need:

  • A VoucherVerse login. An admin invites you on the Users page as Staff (scanner) and assigns the merchants you redeem for (see Invite your team).
  • A phone with a camera, opened over HTTPS. You can also type codes, so a camera is optional.

Staff who sign in anywhere in VoucherVerse land on the scanner; they don't see the dashboard. Admins open it from Scanner in the sidebar and can redeem for every active merchant; Dashboard at the bottom of the scanner takes them back. On a phone, admins land on the scanner too: the dashboard is made for a computer.

Sign in and choose your merchant

  1. Open the scanner and enter your Email and Password, then tap Sign in. You stay signed in on that phone for 24 hours.
  2. If you redeem for one merchant, it is chosen for you. If you have several, tap the one you are working at under Merchants you can redeem for.
  3. You are now on Ready to redeem. The merchant's name is at the top; with several merchants, tap Change next to it to switch. Under the heading, … REDEEMED BY YOU TODAY counts the vouchers you have redeemed for this merchant since midnight.
If you see No merchants, you haven't been assigned to one yet. Ask an admin to add you on the Users page.

Scan or type a code

  1. When a customer shows a voucher, tap Scan voucher. Allow camera access the first time your browser asks.
  2. Hold the voucher's QR code inside the frame. The scanner reads it on its own.
  3. No QR, or it won't read? Type the code printed under it into or enter code and tap Look up. Upper or lower case doesn't matter.

To save battery the camera turns off when a result appears, when you tap Close camera, when you switch apps or lock the phone, and after 30 seconds without a scan. Tap Scan voucher again to reopen it.

Redeem a voucher

A code that can be used opens Voucher found with a Valid badge, the voucher's value and its campaign.

  1. If the voucher belongs to a customer, check the Allocated to card (name, email, phone, recipient ID) against the person in front of you.
  2. Tap Redeem (it shows the value, for example Redeem 10%).
  3. On Redeemed, apply the discount or gift card to the sale in your till as usual. It also shows your count for the day.
  4. Tap Scan next voucher to open the camera again, or Done.

The redemption records the merchant, the time and who redeemed it. A code can only be redeemed once, even if two people scan it at the same moment.

If the campaign runs a prize draw, a redemption may win: you see Winner! with the prize to hand over, and any Prize code to give the customer. Some draws ask Who's redeeming? first for a code with no customer: enter their email or phone. See Run a prize draw.

Give a code to a customer at the counter

Codes that haven't been given to anyone yet (for example printed cards) can be given to a customer when they scan, to use now or later.

  1. Scan the code. On Voucher found it says Customer: Not allocated. Tap Allocate to customer.
  2. Enter the customer's Email, Phone number or both, and their Name if you like. Type the phone number with its country code instead of the leading 0, for example 27 82 123 4567 for South Africa.
  3. Tap Review, read the details back to the customer, then tap Allocate (or Edit to fix them).
  4. On Voucher allocated, tap Redeem to use it now or Done to leave it for later.

If the email or phone already belongs to a customer, the voucher goes to that customer. A name you enter only names a customer who has none; it never renames anyone.

Fix a mistake: change the customer

Right after allocating, Voucher allocated has a Change customer button. It opens the same form, filled in; correct it, review and tap Change customer.

Only the person who allocated a voucher can change its customer, and only within 30 minutes. After that, ask an admin.

When a code can't be redeemed

The scanner shows Cannot redeem with the reason. Tap Scan another to carry on.

MessageWhat it meansWhat to do
Already redeemedThe code was used before. The scanner says when, where and by whom.Don't apply the discount. The customer can contact the business that sent the voucher.
ExpiredThe campaign has closed, or the voucher was cancelled.Expired vouchers can't be reinstated from the scanner. An admin can check it on the Vouchers page.
Not runningThe campaign is paused or hasn't started yet.Check the campaign dates with an admin.
Wrong merchantThis campaign can only be redeemed at the merchants listed.If you work at one of them, switch merchant at the top of the scanner.
Plan inactiveYour company's VoucherVerse plan is unpaid or has ended.Don't apply the discount. Ask an admin to renew the plan on the Billing page.
Not foundNo voucher has this code, or its campaign was deleted.Check the code for typos and try again. If it's right, ask an admin.

If you see You can't redeem for … any more, an admin has removed you from that merchant or deactivated your login. It applies from your very next scan.

Camera problems

MessageFix
Camera access is blockedAllow the camera for this site in your browser's settings, then tap Scan voucher again.
The camera needs a secure (HTTPS) connectionOpen the scanner with an https:// address.
No camera availableType the code instead.

You can always close the camera and type the code instead.

Sign out

Tap Sign out at the bottom of the scanner. This also signs you out of the dashboard in that browser. Sign out on shared phones at the end of a shift.

Next guideRedeem codes in an Infobip chatbot